Nokia E71 phones working with CCM over wireless

[Derek McCormick]

Hi,

Has anyone got any good pdf for configuring Nokia phones to work in dual mode with wireless and call manager setup.

Thanks,

Derek

[pasimahone]

Hi,

So you can see that Nokia device is connected to server and it has an IP-address?

If so, goto SCCP settings in the Nokia device. (Tools->Settings->Connection->SCCP settings).

What does the profile show?

Is it in registered state?

If you open the settings can you see 'My caller ID'?

Have you created Internet telephony profile? (Tools->Settings->Connection->Internet tel.)

-pasi-

[marijatopic]

Hi,

SCCP profile is Not registered

My caller ID - Not available

and I created Internet telephone and associated a SCCP profile to it.

[pasimahone]

Hi,

I'm affraid that you have to restart the server to get it working.

Also restarting Call Manager and TFTP services could help. But if you cannot do it, you can configure Nokia phone as Cisco 7970 type to CUCM.

-pasi-

[marijatopic]

deleting access point from my mobile phone helped.

Now i'm registered to CUCM, but in Nokia Call Connector client there isn't Outgoing call number, although i put the DN on CUCM.

Strange...

[pasimahone]

Very strange.

I guess restarting the phone doesn't help?

You could also try to remove SCCP profile and also internet tel. profile.

Reboot the phone and re-create profiles again

Also registering as Cisco 7970 would be worth of trying

-Pasi-