02-16-2024 06:58 AM
I have 7821 sip phones and i m trying to register them on the cme 10.5.
I have uploaded the load to flash1: cause that was the only one it would agree to, however on the register global config the tftp-path flash: command is only accepting flash:
(config-register-global)#tftp-path flash1:
Aborted: invalid tftp path
when I run the flash command this is what im getting
#sh flash:
%Error show flash0: (No such device)
How do I resolve this to allow me register the SIP phones.
Solved! Go to Solution.
02-19-2024 11:32 PM
Managed to get a solution for this.
I moved the flash memory from slot cf1 to cf0 on the router. allowing me to invoke the flash0/flash: where the tftp files were located.
I have attached the before and after screenshots after I switched the flash location.
02-19-2024 11:32 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide