10-15-2015 08:18 AM - edited 03-17-2019 04:35 AM
Hi Guys,
I would like know if the limitation about CME previously still continue in version 9.1. I did the configuration and didn´t worked. I used the document below as reference
https://supportforums.cisco.com/discussion/10147131/parallel-hunt-groups-using-sccp
Are there documentation Cisco informing about this?
Thanks,
Wilson
10-15-2015 08:34 AM
Hi Wilson,
Here is the reference related to this query;
In a parallel hunt group, calls simultaneously ring multiple phones. Using parallel hunt groups is also referred to as application-level forking because it enables the forking of a call to multiple destinations. In versions earlier than Cisco Unified CME 4.3, only SIP phones support parallel hunt groups. In Cisco Unified CME 4.3 and later versions, SCCP phones also support voice hunt groups.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#pgfId-1145800
Cheers!
Rob
10-15-2015 08:41 AM
Hi Rob,
Are there a documentation specific about version 9.1. informing about this limitation or carecteristic. will have that pass this information for my Customer?
Thanks,
Wilson
10-15-2015 08:53 AM
Hi Wilson,
Unlike CUCM, CME does not have version specific config docs and they are bundled into the Call Coverage feature doc like the one I linked above. The customer would need to look at the feature History Roadmap doc to see when this capability was added (see below)
Cisco Unified CME 7.0/4.3 | |||
Allows you to specify whether Cisco Unified CME in SRST Fallback mode creates octo-line or dual-line directory numbers for ephone-dns that are “learned” automatically from the ephone configuration. | |||
Enables phone users to join a call on a shared octo-line directory number by pressing the Cbarge soft key and converting the call to an ad hoc conference. | |||
Enables a transferred call to return to the phone that initiated the transfer if the destination does not answer. | |||
Support for Cisco Unified CME on the Cisco 3200 Series Mobile Access Router was added. | |||
Cisco Unified Communications Manager Express 7.0/4.3 Supported Firmware, Platforms, Memory, and Voice Products | |||
Modifies the digit-collection process for consultative call transfers. After a phone user presses the Transfer soft key for a consultative transfer, a new consultative call leg is created and the Transfer soft key is not displayed again until the dialed digits of the transfer-to number are matched to a transfer pattern and consultative call leg is in alerting state. | |||
Increases the number of entries supported in a search results list from 32 to 240 when using the directory search feature. | |||
Adds support for the following: – – | |||
Allows you to dynamically add a new phone type to your configuration without upgrading your Cisco IOS software. | |||
Enables IP phone users to record a phone conversation when Cisco Unity Express is the voice mail system. | |||
Sets the maximum number of SCCP phones that can register to Cisco Unified CME using the max-ephones command, without limiting the number that can be configured. This enhancement also expands the maximum number of phones that can be configured to 1000. | |||
Adds octo-line directory numbers that support up to eight active calls, both incoming and outgoing, on a single phone button. Unlike a dual-line directory number, an octo-line directory number can split its channels among other phones that share the directory number. | |||
Enables phone users to block other users from seeing call information or barging into a call on a shared octo-line directory number. | |||
Adds support for one-way Push-to-Talk (PTT) in Cisco Unified CME without requiring an external server to support the functionality. PTT is supported in firmware version 1.0.4 and later versions on Cisco Unified wireless IP phones with a thumb button. | SCCP: Configuring One-Way Push-to-Talk on Cisco Unified Wireless IP Phones | ||
Allows IP phone users to configure their own speed-dial and fast-dial settings directly from the phone. Extension Mobility users can add or modify speed-dial settings in their user profile after logging in. | |||
Allows a phone user to transfer a call directly to a voice-mail extension by pressing the TrnsfVM soft key. | |||
From;
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide