03-09-2016 10:00 AM - edited 03-17-2019 06:10 AM
Hi,
I have a 2921 router with CME and need help to set up a password when prompted want to make calls and enter the password if they can not make calls outside
03-09-2016 10:04 AM
Hi,
Please check Forced Authorization Codes (FAC);
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefac.pdf
- Vivek
03-09-2016 10:06 AM
You will need to configure FAC for this, take a look below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefac.html
Regards
Deepak
03-09-2016 03:03 PM
to set the ephone-dn 1 have to enter the password to make calls this would be the right way?
voice lpcor enable
voice lpcor custom
!
group 10 Manager
group 11 LocalUser
!
!
voice lpcor policy Manager
accept LocalUsar fac
accept Manager fac
service fac
!
!
application
package auth
package param passwd 12345
param user-prompt flash:en_bacd_enter_dest.au
param passwd-prompt flash:en_welcome.au
param term-digit #
param abort-digit *
param max-digits 32
!
!
voice-port 0/0/0:1
lpcor incoming Manager
lpcor outgoing Manager
!
!
ephone-dn 1
number 2881
label Recibo - 2881
description Recibo - 2881
lpcor type local
lpcor incoming LocalUser
llpcor outgoing LocalUser
!
ephone-dn 2
number 2860
label 2860
call-forward busy 2000
call-forward noan 2000 timeout 18
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide