11-09-2012 12:24 AM - edited 03-16-2019 02:05 PM
Dear All
I face the 7970 IP Phone bricked problem after power on as below detail.
- Screen of IP Phone not display anything and it seem like no power feed to screen
- The green light run from the first "line button" to the last as sequential and also repeat and repeat.
- All of button on the phone not response anything
- I have already applied "#123456789*0#" but the problem still be the same
- The onlything work normaly is the phone able to get IP from DHCP but no more action connect to TFTP
Please kindly help or suggest me to solve this issue.
Best Regards
Len
11-09-2012 05:42 AM
Search forum for the many identical threads.
11-09-2012 06:28 AM
Hi,
Paolo is correct..Many threads on this..here is one for you..
https://supportforums.cisco.com/message/3712835#3712835
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
11-10-2012 01:08 AM
Thx a lot ., i will try and update back ^^
11-11-2012 08:47 PM
The problem is solved., Thx a lot all. ^^
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide