cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1434
Views
0
Helpful
2
Replies
Highlighted
Participant

PVDM3 installation

                   Hello guys!

Can PVDM3s be combined? For example, on an existing Cisco ISR 2921 with a PVDM3-32 installed in slot 0, can a second PVDM3-64 be installed on slot 1? Also, what is the recommended PVDM for a deployment of approx. 160 users traversing a single ISR 2921 as the voice gateway?

Thanks in advanced!

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Mentor

PVDM3 installation

Yes, you can combime them in the available slots.

The required DSPs depends on what your users need them for. You will need to use the dsp calculator to know how many dsp you need for your environment.

You can access the dsp calculator here

http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

View solution in original post

2 REPLIES 2
VIP Mentor

PVDM3 installation

Yes, you can combime them in the available slots.

The required DSPs depends on what your users need them for. You will need to use the dsp calculator to know how many dsp you need for your environment.

You can access the dsp calculator here

http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

View solution in original post

Participant

PVDM3 installation

Excellent, thanks a lot for the information!

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here