cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
120
Views
0
Helpful
1
Replies
is_mail123
Beginner

QOS Reports for call

 

hi all cisco community,

 

I am unable to get the QOS reports for my client with using a third party software using cdr report ,

I what to know how do I perfectly configure the cucm box to get the qos and call details record.

 

is there any relation with doing owner user id assignment and device association on the cucm with getting qos reports well.

 

cucm 9.1

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
uldericonucci
Beginner

Hi,

 

probably you have to change the CallManager  Service Parameters "Call Diagnostic" to True on all the servers in your cluster, because you need the CMR files.

 

Give a look here:

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/admin/CUCM_BK_C66F5BB5_00_cucm-cdr-administration-guide-90.html

 

and here:

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/car/CUCM_BK_CB39F074_00_cdr-analysis-reporting-administration-90/CUCM_BK_CB39F074_00_cdr-analysis-and-reporting-administration_chapter_010.html

 

Regards,

 

Ulderico

 

 

 

View solution in original post

1 REPLY 1
uldericonucci
Beginner

Hi,

 

probably you have to change the CallManager  Service Parameters "Call Diagnostic" to True on all the servers in your cluster, because you need the CMR files.

 

Give a look here:

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/admin/CUCM_BK_C66F5BB5_00_cucm-cdr-administration-guide-90.html

 

and here:

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/car/CUCM_BK_CB39F074_00_cdr-analysis-reporting-administration-90/CUCM_BK_CB39F074_00_cdr-analysis-and-reporting-administration_chapter_010.html

 

Regards,

 

Ulderico

 

 

 

Create
Recognize Your Peers
Content for Community-Ad