05-18-2015 06:31 AM - edited 03-17-2019 03:02 AM
Hello,
I am looking for steps of RAID configuration for UCS C220 M3. I need to install SocialMiner on this server.
Thank you
Solved! Go to Solution.
05-18-2015 03:02 PM
The RAID configuration is documented here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers.html
Also, you should confirm that the server meets the UCS specs-based or TRC support requirements.
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_SocialMiner
05-18-2015 03:02 PM
The RAID configuration is documented here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers.html
Also, you should confirm that the server meets the UCS specs-based or TRC support requirements.
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_SocialMiner
05-22-2015 10:40 AM
Hi Jonathan
Thank you for your reply
05-23-2015 06:25 AM
+5 to Jonathan for providing proper answer.
In additional pay attention to which C220M3 server you have as some come with 500 Gb drive configured as RAID5, and others with 300Gb drives in RAID 10, keeping them as such is recommended.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide