10-31-2012 08:18 AM - edited 03-16-2019 01:57 PM
Hi all,
I have a Voice Gateway h323, and it has 2 E1 VWIC Cards Conected to 2 Different PSTN Carriers, I've experiencing intermitences on the CO Company Service and I decide to Add for each dial-peer, a copy with a preference of 2 for backup,
The problem here is that it take about 10 seconds to jump to the back up dial-peer.
Example:
dial-peer voice 124 pots
preference 1
destination-pattern 906.
port 0/1/1:0
prefix 06
no register e164
dial-peer voice 125 pots
preference 2
destination-pattern 906.
port 0/1/0:0
prefix 06
no register e164
I know there is a h225 command for Voice Dial-peers, but that can´t be applied to Pots dial-peer.
voice class h323 1
h225 tcp timeout establish 3
How can I reduce the timeout establis for pots dial-peers?
Reggards.
Solved! Go to Solution.
10-31-2012 10:33 AM
Hi,
Try adding
!
dial-peer outbound status-check pots
!
This will stop the gateway looking at the outgoing dial peer if the voice port is down
Regards,
Alex.
Please rate useful posts.
10-31-2012 10:33 AM
Hi,
Try adding
!
dial-peer outbound status-check pots
!
This will stop the gateway looking at the outgoing dial peer if the voice port is down
Regards,
Alex.
Please rate useful posts.
11-02-2012 09:07 AM
Well I used this command, but I have not way to check it, so thanks for the help and there are your 5 stars.
Reggards,
11-02-2012 02:38 PM
Juan
Thanks for the rating
Have a we look at this link - a good explanation
Regards,
Alex.
Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide