Hi everybody
Please consider the following:
Iphone1------------CME/tftp
CME router has following config:
telephony-service
load 7960-7940 P00308000500
max-ephones 4
max-dn 4
ip source-address 201.201.201.1 port 2000
cnf-file location flash:
max-conferences 4 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1
number 20001
!
!
ephone-dn 2
number 20002
!
!
ephone 1
mac-address 0006.537B.84EF
button 1:1
!
!
!
ephone 2
mac-address 0006.28F0.F7E7
button 1:2
=================================
The cisco ipphone1 i(201.201.201.11) issending CME( 201.201.201.1) following register message.
No. Time Source Destination Protocol Length Info
405 107.462363 201.201.201.11 201.201.201.1 SKINNY 130 RegisterMessage
Frame 405: 130 bytes on wire (1040 bits), 130 bytes captured (1040 bits)
Ethernet II, Src: Cisco_7b:84:ef (00:06:53:7b:84:ef), Dst: Cisco_37:8a:c0 (00:12:d9:37:8a:c0)
Internet Protocol Version 4, Src: 201.201.201.11 (201.201.201.11), Dst: 201.201.201.1 (201.201.201.1)
Transmission Control Protocol, Src Port: 49824 (49824), Dst Port: cisco-sccp (2000), Seq: 105, Ack: 1, Len: 76
Skinny Client Control Protocol
Data length: 68
Header version: Basic (0x00000000)
Message ID: RegisterMessage (0x00000001)
Device name: SEP0006537B84EF
Station user ID: 0
Station instance: 1
IP address: 201.201.201.11 (201.201.201.11)
Device type: TelecasterBus (8)
Max streams: 0
I just want to know if Station instance is 1 because of these commands :
ephone 1
mac-address 0006.537B.84EF
button 1:1
ephone-dn 1
number 20001
thanks and havea great day.
