07-14-2014 01:41 PM - edited 03-16-2019 11:24 PM
Hi!
I need to know if it is possible to replicate the database (initial setup, gateway, partition, CSS, pattern, IP Phones, etc.) of a mode subscriber CUCM 8.6 to a new installation of CUCM publisher. Unfortunately a few days ago the CUCM Publisher lost all data integrity in Raid5, and there is no backup for FTP.
The idea is that these same configuration as the subscriber has to be replicated in the new publisher and to make changes.
Best regards.
07-14-2014 04:13 PM
You cant do that but you might be able to take the backup of a subscriber and restore to the publisher.
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/116946-technote-product-00.html
07-14-2014 04:16 PM
Hi,
Have a read at this link:-
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/116946-technote-product-00.html
Hope this helps
Regards
Alex
07-14-2014 04:26 PM
Yes you can restore the Publisher database from the Subscriber database starting CUCM version 8.6(1). Here are step by step instructions:
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/116946-technote-product-00.html
Make sure you follow all the instructions accurately. Some components may not restore and may need manual intervention like service activations etc. but generally it should work.
-Terry
07-17-2014 09:00 AM
Hi!
thank you very much for your answer.
I have a question:
the subscriber currently is in production, if I perform the steps in the guide you provided;
Can impact the operation of the phone?
Regards
07-17-2014 09:51 AM
Hi,
there won't be any impact on phones currently registered to Subscriber while restoring.
Once the Publisher is restored, you need to activate the services manually since DRS restore won't start the services.
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide