Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am currently running CUCM 8.5.1 and I need to install a CUCM Device Pack to enable support for the 8831 conference phone.Will my current "default" firmware loads be changed after the device pack is installed?I know that when you install a specific ...
Hi All, I'm attempting to setup email alerts for successful/failed backups in CUCM. I currently have the mailserver configured using RTMT and have alerts enable for CiscoDRFFailure. I have 2 questions however...1. - Is there a way to configure the ...
What is the cheapest and acceptable application for paging with approximately 2000 phones. Our IPSessions had a limit of 200 without purchasing more and we are looking for alternatives. Informacast was not free unfortunately. Thanks
Hello Guys, Could anyone help me on the issue below? I am getting a cause value disconnect 21, on ISDN is considered as toul fraud, however on R2 digital I could not find out what this cause means, anyone has detected this issue before?Jun 16 12:35:4...
I'm able to make all the local conference calls I attempt to make however when I try to complete a long distance conference call I get the message on my display " Cannot Complete Conference". Any ideas?
HiIs it possible to password protect certain calls using callmanager expressEg client attempts to dial internationally and cannot proceed until he enters the correct password?
Can someone help me with the following: If i go to CUCM, Route pattern Configuration i've noticed that at route options - Route this pattern - the language is dutch.How can i change this to get it all to english Nowe i see : Geen foutNiet toegewe...
Hello All, We have a Cisco Attendant 7.X running here on our Call Manager, which is also a 7.X release. Pretty outdated i know. My question is the following: Can i collect logs of the attendant, from when the person logs into the attendant and out of...
We have a customer with CME requesting Cisco Unified CallConnector for click to dial capabilities from Outlook. However, they are ordering 8945 phones. I do not see these phones listed in the datasheet. Has anyone deployed this with phones other t...
Hi all,We have built a CUCM cluster on a hybrid design - our publisher is virtualised which has 80gb of space allocated to it across the appliance!So a few days ago we have been getting RTMT alerts stating that we have breached the 90% fs quota for t...
Hi dear, i got error in my router. it show like belowSystem returned to ROM by bus error at PC 0x4137A1E4, address 0x2D4CD468.anybody used to meet in this case before?? please give me the advice.
We have 3945 series router (voice gateway) with 2 PRIs configured and it is being registered on call manager 9.1 via MGCP. From this one PRI is being used dedicated for making ISD calls. When some one dials any ISD number it's not hitting on router h...
Hi every one I want to upgrade cucm 6.1.1 on MCS to 10.0 on UCS can any one just give me any good advice and some small tips i already read some document and check in google but nothing clear , there is to many way ,Thanks.
Hello Expertswe upgraded from Unity 7 to Unity Connection 10.0 recently, and lost this functionality.Whats needed:For each site, we have about 100 phones, but only 60 of them have voicemail boxes.We want to add a call forwarding rule or such, that Un...
Dear all, Need your Inputs in solving this issue we have call manager 8.5 which we need to get integrated with windows Active directory 2008. Current setup is like thiswe are having additional domain controller of 2008 R1 32 bit where our LDAP of C...
