cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1079
Views
0
Helpful
4
Replies

Requirements for CUCM integration with Microsoft Link

MehmetKaya
Level 1
Level 1

Hello,

cucm version : 8.0.3.10000-8  , Windows versiyon: microsfot link 2010

I want to deploy cucimoc for microsoft office communicator. I want to  that I need cisco presence server or dont need .

or

If ı just install cucm with microsoft link 2010 (without cucimoc). What will be my requirements.( forexmple Presence server ... )

1 Accepted Solution

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

CUCILync does not utilize the CUP server. It is intended to provide the Cisco UC services you do have (e.g. Phone, voicemail, etc) with the MOC client.

Without CUCILync your integration options are a SIP trunk for call forking and/or the CUP server for CSTA gateway of presence information.

Sent from Cisco Technical Support iPhone App

View solution in original post

4 Replies 4

Jonathan Schulenberg
Hall of Fame
Hall of Fame

CUCILync does not utilize the CUP server. It is intended to provide the Cisco UC services you do have (e.g. Phone, voicemail, etc) with the MOC client.

Without CUCILync your integration options are a SIP trunk for call forking and/or the CUP server for CSTA gateway of presence information.

Sent from Cisco Technical Support iPhone App

Hi Jonathan,

You mean If I want to use cucimoc with for ip phones with microsoft office communicator  I dont need cisco presence server right?

and

If I want to use cucm integrated with linc I should use sip trunk for call forking with CUP server ?

You mean If I want to use cucimoc with for ip phones with microsoft office communicator  I dont need cisco presence server right?

CUCIMOC/Lync does not require a CUP server.

If I want to use cucm integrated with linc I should use sip trunk for call forking with CUP server ?

There are a few different options. Here are the documents for all three; read them and decide which makes the most sense in your environment.

Thank you very much Jonathan,

is there any document for Lynch Server 2010 with cucm  as well ?