Restrict calls to a particular number cme

[shiblyibrahim]

How can I block an outgoing call to a number like 118118 or if users dial 9 118118.

I have tried all the alternatives with translation reject, no port number in the dial-peer but still the call seems to go out.

[Carlo Poggiarelli]

Hi Mohamed.

To achieve this you can use cor list.

Have have a look to this doc

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

HTH

Regards

Carlo

Please rate all helpful posts

[shiblyibrahim]

Carlo,

Any other alternative. Since I dont want to use COR at the moment

[Adrian Saavedra]

Hello,

You can use after-hours block pattern under telephony-service.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1022333

Hope to help, please remember to rate if it does.

Kind regards,

- Adrian.

[nirmalissac]

Refer

https://supportforums.cisco.com/thread/2020843

instead of incoming translation profile as depicted here, use outgoing