SCCP on 9900/8900 series phones with CUCM 7/8 is this possible?

[shaftstri]

Hi ,

Is sccp an option with the new 99/8900 series phones?

In CUCM when we add a new we only get a SIP option 99xx i belive. is there a service parametre or device pack we need to install to get sccp happening?

Also - if we have to use SIP is there any specific requirements in CUCM  for the dial plan outside what we normally do with SCCP i.e. install dial-plan route filters

Thank you

[paolo bevilacqua]

These phones only support SIP.

Hoefully Cisco will realize the limitation that this implies f(or CME especially), and come out with SCCP firmware in the future.

[shaftstri]

Thanks for quick response

Quick one - does having SIP phones impact the dial plan , by this I mean is there specific config required outside the norm?

Any CUCM requirement

Any SRST h323 GW requirement

KPML ??

or they will work like a sccp configured phone???

Thanks

[paolo bevilacqua · Accepted solution]

With CM, SIP phones do work same as SCCP ones.

Please remember to rate useful posts clicking on the stars below.