cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
770
Views
0
Helpful
3
Replies

SCCP transcoder out of resources

evangaever
Level 1
Level 1

I'm using an 2811 MGCP voicegateway as SCCP trancoder resource. Sometimes it run out off recources because communications manager isn't counting the resources corretly.

The values on the available resource I see on Communications manager and on the voicegateway are different. In the example below Communications Manager sees 2 in use while the voicegateway sees 0 in use.

A reset of the transcoder on communications manager fixes this but the problems commes back after a few hours.

Stats.png

C2811#sh sccp conn

Total number of active session(s) 0, and connection(s) 0

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Update IOS and try again.

I'm already on c2800nm-ipvoicek9-mz.151-4.M3.bin

Try M4 or 15.0.1M8.

If still trouble, contact the TAC.