Show call active voice compact

[a.trueland1]

When I preform  a "Show call active voice compact" the "ORG" call is the called number and the "ANS" is the calling number.  Is this correct?  Should the "ORG" be the calling number and the "ANS" be the receiving number?

361983 ANS     T2     g711ulaw    VOIP        P856XXXXXXX        x.x.x.x:48248

361984 ORG     T3     g711ulaw    TELE        P856XXXXXXX

AT  

[Nadeem Ahmed · Accepted solution]

ANS would be the number you are calling from and ORG would be the called number to whom you call .

I test couple of scenario in my lab, by checking below you will get more clarity

Scenario

Calling number:5009

Called number:3002

2811-TELCO#show call active voice comp
 <callID>  A/O FAX T<sec> Codec       type        Peer Address       IP R<ip>:<u                                             dp>
Total call-legs: 2
         1 ANS     T15    g711ulaw    VOIP        P5009    10.1XX.1XX.XX:24620
         2 ORG     T15    g711ulaw    TELE        P3002

Scenario Two:

Calling number:3002

Called Number: 5009

2811-TELCO#show call active voice comp
 <callID>  A/O FAX T<sec> Codec       type        Peer Address       IP R<ip>:<udp>
Total call-legs: 2
         3 ANS     T14    g711ulaw    TELE        P3002
         4 ORG     T14    g711ulaw    VOIP        P5009    10.XX.XX.XX:24624