show voice dsp summary does not display my PVDM dsps.

[bwood00011]

I have a c2951 router with 2 PVDM3's that show up in the output of the "show inventory".  They do not show up in the output of "show voice dsp summary".  My ISDN E1 link is up, but no calls succeed.

The "show voice port summary" looks like the ISDN links are configured properly. 

I have never seen dsp's that did not show up in the "show voice dsp summary" output.

The DSPs for the FXS card in slot 0/2/x look OK.

Attached is a show run, show ver, and various voice show command outputs.

[Ayodeji Okanlawon]

Can you send the output of 

1 . show diag 

2.sh voice dsp. 

[bwood00011]

The "show voice dsp" output and some other show output is in the show_version.txt file attached above.  I do not yet have a show diag from the box, but can probably get it soon.

Thanks for your help.

[Mohammed al Baqari]

Hi,

Along with this, can you please share the output of show inventory and sh voice dsp group all

[Aman Soi]

Hi,

what is the PVDM  model u are using ?

regds,

aman

[Ayodeji Okanlawon]

The show voice dsp doesn't show that youyou have any dsp for your pri. I wanted the show voice dsp only, not with summary. 

Please send the show diag, and the others Mohammed asked for

[Josh King]

Hi,

Can anyone assist further with this?  I work with bwood00011 and we are still having trouble figuring this out.

I see that he has attached the requested files, although it looks like the copy of "sh_voice_dsp_group_all.txt" that we received was empty.  If it is very important I can request it once more.

Many thanks for any help,

-Josh