Single Number Reach in CME and CUCM

[Jonathan Seville]

Good day, I know that we can setup users profiles so that they may enable and disable SNR from a softkey on their phones. I would like to know if it is possible to allow them to enable disable SNR remotely. Either by TUI or the users CCM webpage?

Many Thanks

Jonathan Seville.

[Ayodeji Okanlawon · Accepted solution]

They can manage their SNR by the CCM user page. Users can delete and add their remote destination on their ccm user page

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

[Roger Kallberg · Accepted solution]

You can also use Mobile Voice Access for a TUI method to turn on/off SNR.

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App