04-04-2011 12:49 PM - edited 03-16-2019 04:19 AM
Hi,
I have configured call blocking inbound on a SIP trunk but the call blocking is not working. Configuration is below. I have moved the block commands to every dial peer and back again and still call block fails. Using VzB sip trunks with 2801running ios 12.4.20 T4.
voice translation-profile block_harassing_calls
translate calling 4
voice translation-rule 4
rule 1 reject /254702010495/
dial-peer voice 101 voip
description voip dial peer from Verizon for Voice
translation-profile incoming block
call-block disconnect-cause incoming user-busy
Thank you for your help.
Solved! Go to Solution.
04-04-2011 01:15 PM
Under the dial-peer, use this config instead:
call-block translation-profile incoming block
Using a standard incoming translation profile configuration will not work for call blocking.
04-04-2011 12:50 PM
Update: At first glance it looks like my profile names do not match but here is the correction.
voice translation-profile block
translate calling 4
04-04-2011 01:15 PM
Under the dial-peer, use this config instead:
call-block translation-profile incoming block
Using a standard incoming translation profile configuration will not work for call blocking.
04-04-2011 01:25 PM
Success. Thanks much for the quick reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide