01-23-2015 04:33 AM - edited 03-17-2019 01:42 AM
Hi all
I'm trying to configure a SNR on a CME (7.1). Internal incoming calls are working, external incoming call are not.
Here the configuration.
ephone-dn 26 dual-line
number 726 no-reg primary
label xxx(726)
description xxx
name xx
mobility
snr 5726 delay 0 timeout 5
allow watch
huntstop channel
Call-forwardind all works for external incoming calls.
Do I miss something?
Kind regards,
Norbert
Solved! Go to Solution.
04-19-2018 11:14 PM
There was an issue on the associated service on the incoming dial-peer.
After removing it, SNR was working
04-19-2018 11:14 PM
There was an issue on the associated service on the incoming dial-peer.
After removing it, SNR was working
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide