05-14-2018 06:08 AM - edited 03-17-2019 12:48 PM
Hello,
I have CUCM 10.5 and I want to enable speed dial feature on Cisco 7906 SIP Phone but I don't find the tab of add speed dial?
How can I fix this problem ?
Solved! Go to Solution.
05-14-2018 06:49 AM
05-14-2018 07:48 AM
That doesn't seem to be an option, if you try to change the phone button template for a 7960 SIP device there are only lines available to choose.
05-14-2018 06:49 AM
05-14-2018 06:58 AM
05-14-2018 07:09 AM
Hi Ahmed,
Standard 7906 SCCP and Standard 7906 SIP |
The Standard 7906 SCCP and SIP templates use button 1 for line 1, makes button 2 configurable as the Privacy softkey (default specifies None), and assigns buttons 3 through 6 as speed dials. The user accesses speed dials from the Directories menu or the Navigation button on the phone. |
Check the phone button template assigned to this phone.
Manish
05-14-2018 07:14 AM
Sorry @Manish Gogna It is 7960 not 7906
How can I get the speed dial option appear in SIP ?
05-14-2018 07:48 AM
That doesn't seem to be an option, if you try to change the phone button template for a 7960 SIP device there are only lines available to choose.
05-14-2018 07:58 AM
Hi there
Seems to be Cisco does not support Speed dials with SIP loads. I have personally verified CUCm 10.5 and 11.5.
There's been a couple of old posts about the same issue. Trying SCCP instead could be your best bet.
Hope this helps!
Cheers
Rath!
***Please rate helpful posts***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide