Speed dial in SIP Phones

[Ahmed habib]

Hello,

I have CUCM 10.5 and I want to enable speed dial feature on Cisco 7906 SIP Phone but I don't find the tab of add speed dial?

How can I fix this problem ?

[Manish Gogna · Accepted solution]

Hi Ahmed,

Plz check this

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7906g_7911g/9_0/english/user_guide/P761_BK_UA11AF37_00_user-guide-7906g-7911g/P761_BK_UA11AF37_00_user-guide-7906g-7911g_chapter_01000.html#P761_TP_SD43AB03_00

Manish

[Ahmed habib]

There isn't a speed dial option on SIP phone as shown in image

[Manish Gogna]

Hi Ahmed,

Standard 7906 SCCP and Standard 7906 SIP

The Standard 7906 SCCP and SIP templates use button 1 for line 1, makes button 2 configurable as the Privacy softkey (default specifies None), and assigns buttons 3 through 6 as speed dials. The user accesses speed dials from the Directories menu or the Navigation button on the phone.

Check the phone button template assigned to this phone.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7906g_7911g/9_0/english/user_guide/P761_BK_UA11AF37_00_user-guide-7906g-7911g/P761_BK_UA11AF37_00_user-guide-7906g-7911g_chapter_011.html#P761_TP_S169BAB6_00

Manish

[Ahmed habib]

Sorry @Manish Gogna It is 7960 not 7906

How can I get the speed dial option appear in SIP ?

[Jaime Valencia · Accepted solution]

That doesn't seem to be an option, if you try to change the phone button template for a 7960 SIP device there are only lines available to choose.

[Ratheesh Kumar]

Hi there

Seems to be Cisco does not support Speed dials with SIP loads. I have personally verified CUCm 10.5 and 11.5.

There's been a couple of old posts about the same issue. Trying SCCP instead could be your best bet.

https://supportforums.cisco.com/t5/ip-telephony/7960-sip-speeddial-linekeys-losing-configuration/td-p/2412344

https://supportforums.cisco.com/t5/ip-telephony/cucm8-0-3-no-speed-dial-for-7960-sip-phone-button-template/td-p/1510007

Hope this helps!

Cheers
Rath!

***Please rate helpful posts***