03-26-2010 11:25 AM - edited 03-15-2019 09:59 PM
Using CUCM 7.1, when we disconnnect the call manager. SRST doesn't work. Ephone register with CUBE router however, no dial tone. I attached a configuration of the CUBE router to the thread. Any ideas?
03-26-2010 12:14 PM
Hey Ryan,
Quick question, are you disconnecting the CallManager or are you unplugging the Gi0/0 interface?
03-26-2010 12:28 PM
Cube is connected to Call Manager over a Wan (MPLS/VPN) connection. We kill the route back to call manager to test. g0/1 stays up.
03-26-2010 12:32 PM
When you say the phone registers.. but no dial tone - do you mean it goes to a stable screen, but doesn't have a line number on the display?
Or what?
Thanks
03-26-2010 12:39 PM
Phones look fine, DN's are listed on phone, when we do a "sh ephone reg," they are listed.
03-26-2010 09:45 PM
But are you saying you can't call another IP phone either?
Try bypassing the trunkgroup by creating a specific dial-peer for a cell number and giving it one of the Voice-Ports directly.
Also, why do you have a translation to match up on the "8" when you are already passing the appropriate digits on the dial-peer?
If it is simply that you have no dial tone when you go off hook, I would be interested to know if you get secondary dial-tone when you press 8 or if you can still get out by dialing any digits even though you hear no dial-tone.
03-29-2010 05:09 AM
We cannot call IP Phone to IP Phone within the site. Also, no secondary dial tone when pressing 8. I'll need to look into the dial-peer issue you brought up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide