Hi all,
I have a problem, on the inbound call during SRST mode with E1.
Here is the background
SRST gateway
- image: c2900-universalk9-mz.SPA.154-3.M8.bin
- 1 E1 port (VWIC3-2MFT-T1/E1)
- IP phone is SCCP phone CIPS
- IP phone is SIP phone 7861
ccm-manager fallback-mgcp
!
call-manager-fallback
alias 1 368004 to 1094 cfw 368004 timeout 20
alias 2 368004 to 1006 cfw 368004 timeout 20
alias 3 368004 to 1007 cfw 368004 timeout 20
secondary-dialtone 9
max-conferences 8 gain -6
transfer-system full-consult
ip source-address 10.58.103.2 port 2000
max-ephones 200
max-dn 200 dual-line
system message primary SRST
time-zone 32
time-format 24
date-format dd-mm-yy
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
!
sip-ua
registrar ipv4:10.58.205.2 expires 600
voice register global
mode esrst
system message SIP SRST
max-dn 200
max-pool 1
voice register pool 1
id network 10.58.0.0 mask 255.255.0.0
no digit collect kpml
dtmf-relay rtp-nte cisco-rtp sip-notify
voice-class codec 1
!
dial-peer voice 9 pots
translation-profile outgoing 9
max-conn 20
destination-pattern 9T
incoming called-number 368004
direct-inward-dial
port 0/0/0:15
forward-digits all
!
voice translation-rule 9
rule 1 /..../ /368004/
!
voice translation-rule 10
rule 1 /^9/ //
!
voice translation-profile 9
translate calling 9
translate called 10
When in normal status (Connected with CUCM), all inbound and outbound calls are working great.
When in SRST mode, all outbound calls are OK, except the inbound call
- if make an inbound call by using alias 1 and DN 1094 in phone CIPS (SCCP), calls are working.
- if make an inbound call by using alias 1 and DN 1094 in phone 7861 (SIP), call not work (Cause i = 0x8081 - Unallocated/unassigned number). Нowever, local call from 1XXX to 1094 in phone 7861 (SIP) is ok.
