04-18-2018 11:45 AM - edited 03-17-2019 12:39 PM
Hi,
We have a couple of sx20 (on diferent Regions). I call from one to another and it only TX/Rx at 384kbps video even if i choose a higher call rate.
Its a SIP to SIP call on CUCM as Callcontrol.
Thanks!
Solved! Go to Solution.
04-18-2018 05:05 PM
start with checking the video bandwidth for the region your sx20 is in in cucm, i think the default is 384. set it to like 2.5mbps which is enough for 720p and make sure the other end can is set up to do the same.
04-18-2018 05:05 PM
start with checking the video bandwidth for the region your sx20 is in in cucm, i think the default is 384. set it to like 2.5mbps which is enough for 720p and make sure the other end can is set up to do the same.
04-19-2018 05:37 AM
Thanks Dennis !
Here is my Region Settings; one CX20 is on "REGION-NORTE" and the other one is in "REGION-SUR", and as I see they use 384 kbps, you recommend that we should set the Maximum Session Bit Rate for Video Calls to 2500 kbps on both Region. I have one question, I also have some 8845 Video Phones on each region, how will this affect them ? An what about the audio quality ?
Thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide