System Wide translation to External Number

[Rafael Chavantes]

Hi All,

I need to to make a simple config on CallManager express.

I need to make a 4 digits number when dialed be transformed to a PSTN number and routed.

How can i do that in a way that is available for every dn on the system.

Do i need to create a dial-peer and apply the translations or there is a way do apply that in another place?

Like i can do that using the Callmanager fallback in a SRST gateway..but i didint found something similar in express.

[linuxchild · Accepted solution]

you may use translation like here http://elhallak.wordpress.com/2011/06/30/dial-peer-example/

or maybe just  fast dial like here http://elhallak.wordpress.com/2011/07/09/abbreviated-dialing-for-cme/

Regards

[Rafael Chavantes]

Thanks linux,

Teh abreaviated dialing is exactly what i was wanting.

I thought this was only applied to expand the DN.

Just to confirm....I want that when user dials 4001 the call be redirected to a toll-free number.

If is use num-exp will work, right?

According to Cisco

num-exp

To define how to expand a telephone extension number into a particular destination pattern, use the num-exp command in global configuration mode. To cancel the configured number expansion, use the no form of this command.

num-exp extension-number expanded-number

no num-exp extension-number

[Payal Bhaduri]

Hi,

You can apply a translation rule to the voice port going out to the pstn .