02-06-2014 02:05 AM - edited 03-16-2019 09:37 PM
Hi,
I have CUCME Version 9.1 Cisco 2921 Router and i have Telepresence Ex90 How to configure SIP for this.
Thanks,
02-06-2014 02:23 AM
Hi Amjad,
It is not supported with CME 9.1
you can refer compatibility matrix for CME 9.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html
regds,
aman
02-06-2014 02:47 AM
[+5] for Aman, just wanted to add that this option is not available even in CME version 10.0. You can use CUCM or VCS as the call control server. Please check the following link as well
https://supportforums.cisco.com/thread/2241892
HTH
Manish
02-06-2014 02:50 AM
Thank you so much Mr. Amaan may i know which version of cme i have use to configure Ex90?
02-06-2014 02:56 AM
Hi Manish,
thanks for updating one level up for CME 10.0 [+5]
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide