Hi everybody,
Can someone please help me what the best way is to telnet to each switch/router whit a different subnet
I do not have solid routing/switching background.
I know how to telnet to one subnet ( 10.10.101.1 ) example i make a bridge to my networking connections and manually ad a ip adress that resides
in the same subnet
But i like to know how to telnet to a network whit 2 different subnets.
I'm adding a table to show you how the ip adressing scheme looks like.
Scenario.
I have a cisco voice home lab consist of the following:
1x2811
3x2801
1x3750
servers:
CUCM (Pub/Sub)
CUPS
CUC
CUCCX
Win2k3 AD
Any advise will help
Thanks!