11-07-2007 12:23 PM - edited 03-15-2019 07:07 AM
I found a few threads about 3rd-party SIP phone support in CM...but what about CME? I haven't found any official announcements or documentation on CCO or here in the forums. I'm running CME 4.0 and it definitely doesn't appear to be supported...maybe in a later version though?
Thanks ahead of time.
11-07-2007 12:49 PM
Hi,
About one year ago, Cisco by word of their CCME TME, had said that "certification of third-party phones was in progress".
Since then, nothing has happened.
However, most models are know to work, at least for basic features.
Hope this helps, please rate post if it does!
11-07-2007 01:02 PM
Good to know. That being said, does anyone who has this working in CME (not CM) have any good links or documentation. Also what version of CME are you running? Documentation (as you would expect) for this seems to be non-existent so far.
11-07-2007 01:18 PM
voice service voip
sip
registrar server
voice register global
mode cme
source-address x.x.x.x port 5060
voice register dn 1
number 29
voice register pool 2
id mac 0000.0000.0000
number 1 dn 1
username 29 password 1234
dtmf-relay rtp-nte
codec g711ulaw
no vad
Note: if the phone is local to CME LAN, replace the all zeros MAC with actual mac, and no need for username and password.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide