Timer to calls

[juan_cye_ccna]

Hi,

one of my customers asked me that if CUCM has some parameter to configure a timer to calls, it means that any active call  should be dropped after certain minutes, Can i do that?

Thanks in advance.

[Chris Deren · Accepted solution]

Yes, the "Maximum Call Duration Timer" service parameter can be changed to whatever you want where the max value can be 35791 minutes, the default being 720 minutes.

HTH,

Chris

[juan_cye_ccna]

Hi Chris,

thanks for your response. This parameter is global, do you know a set by extension?

Thanks in advance.

[paolo bevilacqua]

juan_cye_ccna wrote:
Hi Chris,
thanks for your response. This parameter is global, do you know a set by extension?
Thanks in advance.

As often discussed, there is no per-extension setting.

[Chris Deren · Accepted solution]

This is global and will affect all calls, no way around it on CUCM side. You could perhaps develop TCL script that terminates the call after X minutes on the GW if you are using SIP/H323 GW.

HTH, please rate all useful posts!

Chris

[juan_cye_ccna]

Chris,

I appreciate your help. Do you have some link to view an example code?

[Chris Deren]

I do not, Paolo is the TCL expert, perhaps he has some tips :-)

Chris