06-18-2012 02:36 PM - edited 03-16-2019 11:43 AM
I have an h323 FXO gateway, plar'ing inbound calls to a couple of IP phones ... looking to translate UNKNOWN calling party number to a specific trunk id "911-1", "911-2" per 3rd party app company's request. Possible?
TIA,
Brian
06-18-2012 10:27 PM
Hi Brian
Take a look here :
Looks like station-id should fill in the blank where no CLI is presented to the FXO.
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
06-18-2012 11:10 PM
Thanks for the reply. I had tried that however it still displayed "UNKNOWN" at the station. I plan to try 'station-id number' or perhaps a translation rule. I'll post an update once I get it sorted out.
Any other ideas greatly appreciated.
Brian
Sent from Cisco Technical Support iPad App
06-19-2012 06:23 AM
Station-id number solved the problem. In what appears to be a config dependency, station-id number is required for the station-id name to display at all.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide