Trap or SNMP MIB if an endpoint unregister from the CUCM

Mahmoud Simrin · ‎02-27-2013

Hello,

Is there any trap or SNMP MIB if an endpoint unregister from the CUCM ?

Thank you

Harmit Singh · ‎02-27-2013

Hi Mahmoud,

CISCO-CCM-MIB/CISCO-CCM-CAPABILITY MIB

The CISCO-CCM-MIB contains both dynamic (real-time) and configured (static) information about the Cisco Unified Communications Manager and its associated devices, such as phones, gateways, and so on, that are visible on this Cisco Unified Communications Manager node. Simple Network Management Protocol (SNMP) tables contain information such as IP address, registration status, and model type.

SNMP supports IPv4, although the CISCO-CCM-MIB includes columns and storage for IPv6 addresses, preferences, and so on.

The following links talk in more detail about the same:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_6_1/admin/sasnmdes.html

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-CCM-MIB

HTH.

--
Regards,
Harmit.

Mahmoud Simrin · ‎02-27-2013

Hello Harmit ,

Do you know what is the OID for the end point unregistered please ?

Trap or SNMP MIB if an endpoint unregister from the CUCM - See more at: https://supportforums.cisco.com/thread/2202117#sthash.hBb6yydv.dpuf

Harmit Singh · ‎02-27-2013

Hi Mahmoud,

It should be this:

"ccmUnregisteredPhones"          "1.3.6.1.4.1.9.9.156.1.5.6"

It's given in the link I gave you earlier. Here are all the OIDs for CISCO-CCM-MIB:

ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CCM-MIB.oid

HTH.

--
Regards,
Harmit.

Mahmoud Simrin · ‎02-27-2013

Is there a specific test for me to perform that is supposed to generate a specific trap based on the above OID?

Mahmoud Simrin · ‎02-27-2013

Hello Harmit,

Does the above OID generate trap ? We are looking for a trap when a device gets unregistered from the CUCM.