ā02-27-2013 06:02 AM - edited ā03-16-2019 03:57 PM
Hello,
Is there any trap or SNMP MIB if an endpoint unregister from the CUCM ?
Thank you
ā02-27-2013 06:16 AM
Hi Mahmoud,
CISCO-CCM-MIB/CISCO-CCM-CAPABILITY MIB
The CISCO-CCM-MIB contains both dynamic (real-time) and configured (static) information about the Cisco Unified Communications Manager and its associated devices, such as phones, gateways, and so on, that are visible on this Cisco Unified Communications Manager node. Simple Network Management Protocol (SNMP) tables contain information such as IP address, registration status, and model type.
SNMP supports IPv4, although the CISCO-CCM-MIB includes columns and storage for IPv6 addresses, preferences, and so on.
The following links talk in more detail about the same:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_6_1/admin/sasnmdes.html
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-CCM-MIB
HTH.
--
Regards,
Harmit.
ā02-27-2013 09:32 AM
Hello Harmit ,
Do you know what is the OID for the end point unregistered please ?
ā02-27-2013 09:59 AM
Hi Mahmoud,
It should be this:
"ccmUnregisteredPhones" "1.3.6.1.4.1.9.9.156.1.5.6"
It's given in the link I gave you earlier. Here are all the OIDs for CISCO-CCM-MIB:
ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CCM-MIB.oid
HTH.
--
Regards,
Harmit.
ā02-27-2013 10:05 AM
Is there a specific test for me to perform that is supposed to generate a specific trap based on the above OID?
ā02-27-2013 12:11 PM
Hello Harmit,
Does the above OID generate trap ? We are looking for a trap when a device gets unregistered from the CUCM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide