11-27-2012 10:06 AM - edited 03-16-2019 02:25 PM
After adding our asa5505 to our network, the uc520 started to act up. I constantly get a radius alive and dead message on the terminal screen. Also the enable password stopped working. Any ideas?
Sent from Cisco Technical Support iPhone App
11-27-2012 12:09 PM
Alive and dead actually meas dead, and that explains why you can't enable, as no backup method was configured.
You can check ASA config or remove it from the critical path.
11-27-2012 12:53 PM
Paolo, could you explain how to remove it from the critical path?
11-27-2012 02:35 PM
UC500 ---- RADIUS
And no ASA in the middle. Or no RADIUS at all.
11-28-2012 08:08 AM
I was able to change the password and conflicting ip. How do I get rid of the radius server all together. I don't need to use it. It's disabled on CCA already. Here are the messages that keep coming.
Nov 28 10:07:38.289 CST: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.172.5:1645,1813 is not responding.
000714: Nov 28 10:07:38.289 CST: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.172.5:1645,1813 is being marked alive.
000715: Nov 28 10:08:13.223 CST: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.172.5:1645,1813 is not responding.
000716: Nov 28 10:08:13.223 CST: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.172.5:1645,1813 is being marked alive.
11-28-2012 02:11 PM
Check config and remove using CLI.
Please remember to rate useful posts clicking on the stars below.
12-23-2012 07:06 AM
Can you tell me what the actual Comand is on cli to remove radius all together. We are not using it.
Sent from Cisco Technical Support iPhone App
12-26-2012 06:24 AM
Anyone?
Sent from Cisco Technical Support iPhone App
12-28-2012 05:31 AM
I would be willing to pay someone to remote into my system via log me in to take care of this.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide