Upgrade from CUCM 8.02 to 8.6

[sprado010489]

I am planing to upgrade my CUCM to 8.6 from 8.02, I want to know what file do I Have to download there are two versiobs onr that is restricted and one unrestricted , what is the difference betwen those .

Are there diferences with the licensing of the devices betwen those two ??

How can I make a full back up of my server??

Sent from Cisco Technical Support iPhone App

[Rob Huffman]

Hi Sergio,

You will want to use;

UCSInstall_UCOS_8.6.1.20000-1.sgn.iso

The Restricted version is the one that has been around forever and is what 95%

of us run. The un-Restricted version only came out with the release of CUCM 7.1(5)

and it contains many changes to encryption that allows it to be shipped/installed in certain

countries around the world where it was previously not allowed.

You will not need new licenses to move from 8.0 to 8.6

Cheers!

Rob

[sprado010489]

Dear Rob,

Thank you very much for the quick answer.

Thanks !!!!

I will let you know how my upgrade went

Sent from Cisco Technical Support iPhone App

[Joseph Martini]

You also need to download and install the ciscocm.refresh_upgrade_v1.0.cop.sgn on your 8.0.2 server before upgrading.  You can find the file and download it from here http://tools.cisco.com/squish/dAc86.