07-30-2012 03:08 AM - edited 03-16-2019 12:26 PM
1)I have CCM and i have registered VG204 with CCM and it was working fine but now suddenly the phones connected on VG204 shows registration rejected,i am also attaching screenshot for the same
07-30-2012 03:40 AM
Hi mate,
Did you reset the gateway in CUCM after you created lines?
Do you mind posting the gateway configuration (sccp/stcapp and dial-peers)?
What do you have on "show stcapp device summary"?
Cheers
Boris
____
Please rate helpful posts
Пожалуйста оценивайте полезные сообщения
07-30-2012 03:48 AM
07-30-2012 03:52 AM
have a look at the "show stcapp device summary":
Port Device Device Call Dev Directory Dev
Identifier Name State State Type Number Cntl
---------- --------------- -------- ------------- ------- ----------- ----
0/0 AN1FCAF24268000 IS IDLE ALG 6002 CCM
0/1 AN1FCAF24268001 IS IDLE ALG 6099 CCM
0/2 AN1FCAF24268002 IS IDLE ALG 6068 CCM
0/3 AN1FCAF24268003 IS ACTIVE ALG 6148 CCM
the device names do not match MAC address from the CUCM gateway port configuration.
Try using correct MAC in CUCM gateway config and don't forget to reset the gateway after configuration update.
Cheers,
Boris
___
Please rate helpful posts
Пожалуйста оценивайте полезные сообщения
07-30-2012 03:54 AM
BTW it seems that this gateways ports are already registered with CUCM.
Are you sure you are looking at the right gateway?
___
Please rate helpful posts
Пожалуйста оценивайте полезные сообщения
07-30-2012 03:59 AM
Yes i am looking at my PRIMARY gateway 10.2.5.11 and there it shows that registration rejected
07-30-2012 04:00 AM
I will again check and come give me 5min
07-30-2012 03:56 AM
But these MAC addresses are the Vg204 MAC addresses of the 4 ports and they come automatically
07-30-2012 04:08 AM
ITs, the right gatway and correct VG204 Box i am js getting ngaged tone
07-30-2012 06:41 AM
now i am getting error
cmapp_sccp_tftp_download_file unable to get configuration file
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide