cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
699
Views
0
Helpful
2
Replies

Vg204XM FAX

G3261
Level 4
Level 4

Hi, I am wondering if someone can answer my query...if I have brand new vg204xm gateway and if I plug-in analog phone to one of the ports in the back (ports 0/0 to 0/3) should I get fast busy or dial tone or nothing (dead air)? Thanks

1 Accepted Solution

Accepted Solutions

Muhammad Awais Khan
Cisco Employee
Cisco Employee

Hi,

 

As i remember, u should get dial-tone if it is configured. I beleive dial-tone should be there even if nothing is configured. Fast-busy tone should come only if u dial-somthing which is not configured or defined on the VG.

View solution in original post

2 Replies 2

Muhammad Awais Khan
Cisco Employee
Cisco Employee

Hi,

 

As i remember, u should get dial-tone if it is configured. I beleive dial-tone should be there even if nothing is configured. Fast-busy tone should come only if u dial-somthing which is not configured or defined on the VG.

George Sotiropoulos
Cisco Employee
Cisco Employee

Hello,

You should expect a dial-tone as long as there is configuration at the port of the VG.

George

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies