VG300 series network redundancy

[Ted S]

Hi,

We have a couple VG310 and VG320 devices and I was wondering if it is possible to have network redundancy.

We have a VG320 connected to one switch and I would like to use the other Ethernet port and connect it to another switch.

Is network redundancy possible? and if so, how can we achieve this.

Thanks in advance!

Ted

[Andrew Skelly · Accepted solution]

Here is a good document that offers two different options and full details on how to configure.  Hope this helps.

https://www.cisco.com/c/dam/en/us/td/docs/routers/access/vg224/software/configuration/guide/Cisco_Analog_Gateways_Network_Survivability_Deployment_Options.pdf

[Ted S]

Great find! Thanks!

I went with the BVI method and is working as expected!