08-13-2013 05:56 AM - edited 03-16-2019 06:50 PM
Hi Everyone, Have a CME running version 15.1.
One of the voice-ports (specifically, voice-port 2/0/10) on the router acting as number 1832. The users want this number to also ring on two other phones, both of which are IP based (7911 and 7921). Can you tell me if this is possible? Adding the ephone-dn to the two IP phones makes the voice-port not ring...
So am looking for a way to make it work on all of these phones... any suggestions?
Thanks in advance,
Ken
Solved! Go to Solution.
08-23-2013 05:18 AM
No good.
Loaded new version, now phones won't register. Follow threads showing me what to do to recover them, by re-issuing the max-ephones command and still no good, trying to revert to older version now... am in a Bingo situation.
08-23-2013 05:34 AM
For new versions, you may need to do "license accept eula end-user" and reload.
08-29-2013 11:27 AM
Alright, new version loaded, CME up and running. Making change to add the button that matches the desired analog line to the two IP phones, one at a time and testing as each added.
Adding the desk phone (VOIP 7911) to the analog ephone-dn caused no problems. Bell works, analogs work and 7911 works.
As soon as you add the same line to a 7921 Wireless though, none ring.
Is there a way around that?
08-29-2013 12:38 PM
Could be a bug specific to 7921, in that case you would need TAC support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide