08-14-2008 01:26 PM - edited 03-15-2019 12:38 PM
Can voice translation rules be configured on both MGCP & H.323 gateways? Or is there some protocol-based restriction?
Solved! Go to Solution.
08-21-2008 12:52 AM
Nope. MGCP uses centralized dial-plan which all resides in CCM.
You do not use Dial-peers with MGCP
08-21-2008 12:53 AM
As above, dial-peers won't work on an MGCP gateway as all call intelligence resides on the callmanager in this setup. If you're MGCP gateway is configured for SRST then yes you'll dial-peers.
HTH
08-14-2008 01:26 PM
Thanks a lot Darren. This is what was puzzling me. I had seen dial-peers on an MGCP gateway once. Now I do recall that the router was configured for SRST too.
Have a nice day.
Regards,
Ashok.
08-21-2008 12:32 AM
Its not going to work on MGCP. Because MGCP pots ports in under callmanager control, any rule defined is ignored. So you can only use it with H.323.
HTH, pls rate useful posts
08-21-2008 12:49 AM
Thanks Deji,
On more query. Can you configure dial-peers on MGCP gateways ?
Regards,
Ashok.
08-21-2008 12:52 AM
Nope. MGCP uses centralized dial-plan which all resides in CCM.
You do not use Dial-peers with MGCP
08-21-2008 12:53 AM
As above, dial-peers won't work on an MGCP gateway as all call intelligence resides on the callmanager in this setup. If you're MGCP gateway is configured for SRST then yes you'll dial-peers.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide