01-18-2014 12:34 PM - edited 03-16-2019 09:19 PM
I have cme 7.1 with exchange unified messaging. On the voice port I have the connection plar set to the pilot number of the UM auto attendant . I would like to create a translation rule on incoming caller id (my cell phone) that would redirect that single incoming number to an ephone-dn. Goal is so if any incoming caller ID except my cell number goes to the auto attendant, my cell number would be redirected to the ephone-dn
Any help appreciated
01-19-2014 12:37 AM
Jack,
You cant natively route a call to another extensiuon based on the calling number..You may be able to use a tcl script, but thats another level of skill entirely
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
01-27-2014 04:52 AM
Jack,
Do you have callerID for the calls coming in via FXO port ?
If yes, may be you can try a DP with answer-address
dial-peer voice 1 voip translation-profile incoming Cell answer-address
voice translation-rule 2 rule 1 /^(pilotnumber)$/ /(ephone dn)/
voice translation-profile Cell
translate called 2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide