10-28-2010 07:26 PM - edited 03-16-2019 01:37 AM
hello, what steps do i have to follow to configure 2 VWIC2-1MFT-T1/E1 in a 2920, i found lot of information for other platforms, but not for that one
Thanks a lot
Cesar
Solved! Go to Solution.
10-29-2010 05:01 AM
Hi Cesar,
Here is the detailed configuration guide for VWIC cards. Choose the configuration for your requirement.
http://www.cisco.com/en/US/docs/ios/12_0t/12_0t7/feature/guide/t1_mf_t6.html
Regards...
-Ashok.
10-28-2010 07:45 PM
Configure it to do what exactly? In every case I can think of, the configuration is no different from any other ISR series device.
10-29-2010 01:03 AM
i mean phisycally, i just installed the cards, but i never have done this before, i got some guides, but im not really
sure what i have to do in order to have the links up.
Regards
Cesar
10-29-2010 05:01 AM
Hi Cesar,
Here is the detailed configuration guide for VWIC cards. Choose the configuration for your requirement.
http://www.cisco.com/en/US/docs/ios/12_0t/12_0t7/feature/guide/t1_mf_t6.html
Regards...
-Ashok.
10-29-2010 03:52 PM
Thanks a lot!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide