when i add command service aa on dial-peer voice pots line goes to busy?

[AhmedrezaMuhseni]

            Hi all, when i add command service aa on dial-peer voice X pots line goes to busy?

[Chris Deren]

Did you configure your AA application properly?  When you add this command then AA TCL script gets invoked, is you are getting busy it means you did not properly configure the application on your router.

HTH,

Chris

[AhmedrezaMuhseni]

iit's router config; plz cheak it:

application

service aa flash:app-b-acd-aa-2.1.2.2.tcl

  param number-of-hunt-grps 2

  paramspace english index 1

  param menu-timeout 6

  param dial-by-extension-option 5

  param handoff-string aa

  paramspace english language en

  param max-time-vm-retry 2

  param max-extension-length 4

  param aa-pilot 38888

  paramspace english location flash:

  param second-greeting-time 60

  param welcome-prompt en_bacd_welcome.au

  param call-retry-timer 1

  param max-time-call-retry 1

  param voice-mail 5000

  param service-name queue

!

service queue flash:app-b-acd-2.1.2.2.tcl

  param queue-len 30

  param aa-hunt1 1200

  param queue-manager-debugs 1

  param aa-hunt2 2100

  param number-of-hunt-grps 2