03-25-2009 10:02 AM - edited 03-15-2019 05:05 PM
Hi ,
have a small problem with the translation profile rule :
on cme 2801 do the following config.
voice translation-rule 81
rule 1 /^81/ //
!
!
voice translation-profile strip81
translate called 81
dial-peer voice 31 voip
translation-profile outgoing strip81
destination-pattern 81T
voice-class sip transport switch udp tcp
session protocol sipv2
session target ipv4:xxx.xxx.xxx.xxx
dtmf-relay sip-notify
when try to show te rule with "sh translation-rule" no rule exist .
There are someone with any idea ??
Solved! Go to Solution.
03-25-2009 10:08 AM
Hello,
Try "show voice translation-rule"
Hope that helped, if so please rate.
03-25-2009 10:08 AM
Hello,
Try "show voice translation-rule"
Hope that helped, if so please rate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide