About leonardo.vecchio

leonardo.vecchio · 03-25-2009

Hi , have a small problem with the translation profile rule :on cme 2801 do the following config.voice translation-rule 81 rule 1 /^81/ //!!voice translation-profile strip81 translate called 81dial-peer voice 31 voip translation-profile outgoing stri...

leonardo.vecchio · 12-02-2008

Hi , have read some post about my problem but nothing to resolve my problem .Need to config call blocking with after-hour exempt , for the config. have see the guide on Cisco .The problem is Login softkey , need to cofig. on all phone of my custome...

leonardo.vecchio · 03-04-2008

Hi , i have installed a CCME 2801 with 2 ISDN BRI interface .I use 4 isdn line to in e out calling .The 2 receptionist use the IP Phone 7931.There is a way to monitor the status of the isdn line on the 7931 key system ? Thanks .

leonardo.vecchio · 02-22-2008

Hi ,i need some help about a wlc 526 .The system is new , have installed e configured without problem.The ip address of man.int. is 192.168.1.28/24 the ip of the dhcp server (win2003) is 192.168.1.18/24 ,the lap 521 connect correctly to wlc 526 , tha...

leonardo.vecchio · 01-24-2008

Hello ,I have a problem with ip phone 7931G .I'm unable to switch between 2 active calls .I respond at the first call , when respond the second call the first going in hold state and there is no way to hold the second call to resume the first .When t...

leonardo.vecchio · 03-25-2009

Hi Ricardo , this link is a good guide to Multicast address IP .http://www.tcpipguide.com/free/t_IPMulticastAddressing.htmThe address for the internal/local use must be 239.0.0.0 /255.0.0.0Administratively-scoped (local) multicast addresse I hope to ...

leonardo.vecchio · 12-03-2008

Hi , is already configured with "login timeout 300" Thanks ,

leonardo.vecchio · 02-29-2008

Hi ,have also tried to enable " DHCP Addr. Assignment " , but the device (IP phone or pc) not receive the ip .Have any other idea ?Thanks .

leonardo.vecchio · 02-21-2008

Hi lenpet hun ,i have the same problem , but the dhcp server is an 2003 server .On the controller has configured the dhcp server address in the management interface .The ip subnet is the same , but the client not receive ip address .Have also tried ...

leonardo.vecchio · 01-24-2008

Hi Rob, I have already see the solution posted , but i need know if the problem is the limitation of the phone or the funcionality of the phone is the same of the other model (7941 and 7911)Thanks .

Member Since	‎06-25-2002 04:32 AM
Date Last Visited	‎04-06-2019 06:35 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

xrule with tag <xx> doesn't exist , CME 7.0

Unable config. softkey "Login" on 7911

Monitoring isdn line on 7931

DHCP with WLC 526 and LAP521

Unable navigate between 2 active calls on 7931G

Re: MoH CCME

Re: Unable config. softkey "Login" on 7911

Re: DHCP with WLC 526 and LAP521

Re: WLC526 DHCP issue

Re: Unable navigate between 2 active calls on 7931G