06-08-2011 11:52 AM - edited 03-01-2019 05:27 PM
Solved! Go to Solution.
06-08-2011 01:08 PM
HI,
A new syntax is necessary to configure dual-stack VRF in IOS:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_ipv4_ipv6_ps11280_TSD_Products_Configuration_Guide_Chapter.html
Also what you want to configure is 6VPE and not 6PE.
HTH
Laurent.
06-08-2011 01:08 PM
HI,
A new syntax is necessary to configure dual-stack VRF in IOS:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_ipv4_ipv6_ps11280_TSD_Products_Configuration_Guide_Chapter.html
Also what you want to configure is 6VPE and not 6PE.
HTH
Laurent.
06-08-2011 02:15 PM
Thanks Laurent, I've been searching for something like this for days. I'll give it a shot, thenif it is as good as it is looks, I'll mark this thread answered
06-12-2011 10:23 AM
Well, that was interesting! Laurent is quite correct, the document gives the necessary information.....BUT, you have to be very picky about the IOS you use, and on what platform the necesary commands are available....for IOS 12.4, I ended up using T-train versions, which in a production environment may be considered "suboptimal". However, the main thing is that with Laurent's answer, I have got the config I needed. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide