03-29-2013 07:51 AM - edited 03-01-2019 05:39 PM
Hi all,
do you have any information when the OSPFv3 IPSec authentication will be supported on Catalyst 4900M? Thank you.
Roman
Solved! Go to Solution.
04-05-2013 09:14 PM
Roman,
This is supported from 15.1(1)SG. It requires a crypto image of course.
Hope this helps
03-30-2013 01:13 PM
Hello Roman,
I do not have access to any 4900M at the moment but you sure you cannot run it in the 15.1(2)SG release?
I mean if OSPFv3 it's supported on the IOS then you should have the hability to configure authentication, it's embedded on the protocol.
Now what I suspect the problem is... Is that you do not have a crypto image so then you cannot configure IPSec,
Make sure you are running a Crypto IOS image and you should be good to go
Regards,
04-05-2013 09:14 PM
Roman,
This is supported from 15.1(1)SG. It requires a crypto image of course.
Hope this helps
04-08-2013 02:41 AM
Thank you very much. Roman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide