05-30-2005 09:51 AM
Hi all,
We've been asked to make a pilot test for interoperability between 2 M20 and 2 7609(Sup720-3BXL) for MPLS VPN and traffic engineering.
Can anyone help with what I have to setup in order to keep interoperability between the systems? Any configuration examples?
05-30-2005 05:25 PM
06-08-2005 11:47 PM
Hi, can you also send me any config with LABS? are you using same BGP AS with LDP?
Thanks.
06-13-2005 05:40 PM
Hi,
Talking about MPLS VPN across Multi AS networks involves many conditions, for instance, IGP routes are not exchanged by BGP... but still we can provision a PW across Multiple AS.
Consider this,as you might know that for a LDP based pseudowire end to end connectivity within a single autonomous system, you must have /32 host routes of PE routers and the corresponding labels, which you learn through IGP and LDP/RSVP.
Now, to obtain the same in a multi-AS environment you can use eBGP to exchange the /32 host routes of PE devices and the corresponding labels across the autonomous system boundaries and then redistributing the /32 host routes learned through EBGP into IGP.
From the point of view of the PE routers, this is similar to the single autonomous system scenario except that the /32 host routes appear to be of IGP external types in the routing tables.
Instead of using LDP, ASBRs utilize IPv4 label information along with the host route advertisements in BGP update messages and set up LSPs between one another for these host routes.
Let us know if this helped...
sultan
06-28-2005 09:46 AM
Good points. Do you have any lab/test sample senario?
06-28-2005 10:50 PM
08-28-2005 09:33 AM
Very good. I would appriciate if you could also sent me the within same AS results.
03-05-2008 07:10 AM
Hi
could you pls upload again the pdf ?
tks
Ric
01-25-2008 06:02 AM
don't worry sorted it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide