IOS for MPLS on 1800 & 2600 series router

[gopinath.krishna]

Hi,

What IOS version to be on 1800 & 2600 series routers to support MPLS

[irisrios]

To implement MPLS, you need a Cisco 2600 router or later. Refer URL for more information

http://cisco.com/en/US/tech/tk436/tk428/technologies_q_and_a_item09186a00800949e5.shtml#qa10.

[mohammedmahmoud]

Hi,

Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

BR,

Mohammed Mahmoud.

[ranjeetba]

Hi

IOS c2600-adventerprisek9-mz.123-24.bin suuports MPLS on 2600. I am using it on Cisco 2611xm. Hope this helps.

[Marrespeto]

Hello,

Im using the c2600-adventerprisek9-mz.124-25d.image and mpls ip is not working. Someone can help me?

[ranjeetba]

Hi

IOS c2600-adventerprisek9-mz.123-24.bin suuports MPLS on 2600. I am using it on Cisco 2611xm. Hope this helps.

[Alessio Andreoli]

Hi there,
Be aware that the 2600xm platform , due to its memory capabilities, is able to run 12.24d too. I have implemented it myself to enable ssh v2.
For the 1841 of course no issue with the very last series either.

Hope this helps
Alessio

Sent from Cisco Technical Support iPad App

[ranjeetba]

Dear Alessio

I did not get you what are you trying to say here. Please help me out in understanding your sentence "

Be aware that the 2600xm platform , due to its memory capabilities, is able to run 12.24d too" .

[Alessio Andreoli]

Hi,
I was just telling that if a XM platform is available the IOS 12.4(24) is a further option. In my experience I have found the 12.4 train much better than 12.3. And then... Yeah, I was telling about memory capabilities because the 2600xm platform differs from the normal 2600 only for the amount of memory you can install.

Alessio

Sent from Cisco Technical Support iPad App

[Samil Lama]

For MPLS Support on 1800 & 2600 Series you need IOS Release 12.3(14)*T or later.

Cisco IOS Release 12.3(14)YT on 1800 Series ISR

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_bulletin0900aecd802d0c05.html

Cisco IOS Software Release 12.3T Features

http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_bulletin09186a00801abfda.html

[Marrespeto]

Hello,

Im using the c2600-adventerprisek9-mz.124-25d.image and mpls ip is not working. Someone can help me?

Thanks

Angel Marres

[Harold Ritter]

According to the Cisco Feature Navigator, it requires a 2691 to run MPLS.

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp

Regards,

[Marrespeto]

Hello,

Could you please share with me the exact IOS name please?

Could be c2691-adventerprisek9-mz.124-4.XC2.bin?

Regards.

Angel Marres

[Leo Gal]

Hi

http://www.eve-ng.net/community
is what you need.

Testing and learning MPLS on 26XX is like trying to build a castle with a plastic shovel for kids.